OVERHUNG LOAD ADAPTORS

4-bolt mounting (non-SAE) accommodates same loads as the Model 200 with ball bearings for motor and pump shafts up to 1 inch in diameter.

• For applications with motor or pump shafts up to 1″ diameter
• Features deep-grooved ball bearings
• Accepts speeds up to 4400 RPM with proper lubrication
• Model 400 SAE A Mount

Model 200 SAE A Mount Overhung Load Adaptors

Applications utilizing SAE “A” 2-bolt mount with ball barings for motor or pump shafts up to 1″ in diameter.

• Features deep-grooved ball bearings
• Accepts speeds up to 4400 RPM with proper lubrication
• Standard pilot depth is 0.125. Deep Pilot is availabl

Model 300 SAE A Mount Overhung Load Adaptors

SAE “A” 2-bolt mount with same mounting dimensions as Model 200, but utilizes larger ball bearings which allow for heavier overhung loads and a larger input bore diameter.

• For medium to heavy-duty applications
• Features deep-grooved ball bearings
• Featuring the sam overall size as the Model 200, the Model 300 has
• larger bearings for heavy-duty applications
• Accepts speeds up to 3550 RPM with proper lubrication
• Standard pilot depth is 0.125. Deep Pilot is available.

Model 500 SAE A Mount Overhung Load Adaptors

SAE “A” 4-bolt mount, which uses tapered-roller bearings. Standard input bores include: 1-1/4″ keyed, 1″-6B spline, or 14 tooth 12/24 spline.

• For SAE “A” heavy-duty bearing block applications with 4-bolt mounting
• Features heavy-duty tapered roller bearings
• May be used on 2-bolt mount by tilting 22-1/2 degrees
• Accepts speeds up to 3330 RPM with proper lubrication

SAE “B” 2- or 4-bolt mount using tapered-roller bearings. Standard input bores include: 7/8″, 1″, or 1-1/4″ keyed; 13 tooth 16/32 spline, or 15 tooth 16/32 spline. Also available with 1″ keyed through-bore as a standard.

• For SAE “B” mount motor or pump applications
• Features heavy-duty tapered roller bearings
• Accepts speeds up to 3300 RPM with proper lubrication Model 600

SAE “C” 2- or 4-bolt mount using tapered-roller bearings. Standard input bores include: 7/8″,1″, or 1-1/4″ keyed; 14 tooth 12/24 spline. Also available with 1″ keyed through-bore as a standard.

• Model 800 is for SAE “C” mount motor or pump applications
• Model 900 is for SAE “C-C” mount motor or pump applications
• Both models Feature heavy-duty tapered roller bearings
• Model 800 accepts speeds up to 3300 RPM with proper lubrication
• Model 900 accepts speeds up to 2700 RPM with proper lubrication

SAE “D” mount using large tapered-roller bearings for heavy-duty applications. Standard input bores include: 1-3/4″ keyed, or 13 tooth 8/16 spline.

• For SAE “D” mount motor or pump applications
• Features heavy-duty tapered roller bearings
• Accepts speeds up to 3500 RPM with proper lubrication Model 1100

Both the SAE “E” and SAE “F” mounts have the same physical size; only the pilot diameter and bolt circle are different for motor or pump mounting. These models use large spherical-roller bearings for heavy-duty applications. Input bores are made to customer specifications up to a 2-1/2″ diameter.

• Spline input bores available
• Available in up to 3 1/2″ diameter output shaft. Special input and outputs available
• Features heavy-duty, spherical roller bearings
• Accepts speeds up to 2300 RPM with proper lubrication Model 1250

The physical size for the SAE “E” and SAE “F” mounts are the same, but the pilot diameter and bolt circle are different for motor or pump mounting. The SAE F Mount uses large spherical-roller bearings for heavy-duty applications. The input bores can be up to a 2-1/2″ diameter, depending on customer specifications.

• Spline input bores available
• Available in up to 3 1/2″ diameter output shaft. Special input and outputs available
• Features heavy-duty, spherical roller bearings
• Accepts speeds up to 2300 RPM with proper lubrication Model 1500

Zero Max

World-Leading Expert !